Stainless steel tubing for liquid cooling is placed in the additional channels of the aluminum track next to the tubular heater in the Heat and Cool designs. The overall low mass construction and high thermal conductivity of the aluminum provides extremely uniform surface temperatures and rapid cooling cycles.
Maxibands are constructed as sets; each half consists of one tubular heating element and one aluminum track segment.
The low thermal expansion strap securely fastened to the aluminum track segments provides a built-in hinge, making handling and installation easier. Mounting brackets are welded to the strap, providing the clamping force required to draw the heater assembly evenly and tightly to the cylinder. The straps are equipped with clamping brackets with 1/4"-20 socket head cap screws.
Maxibands can be designed as Heat and Cool, Heat Only or Cool Only. The channels in the extruded aluminum track are precisely sized to accept a .315 diameter tubular heating element and provide an excellent heat sink for rapid heat transfer and good temperature uniformity.
Special Features:Rugged contamination-proof and excellent heat transfer
Stainless steel tubing for liquid cooling is placed in the additional channels of the aluminum track next to the tubular heater in the Heat and Cool designs. The overall low mass construction and high thermal conductivity of the aluminum provides extremely uniform surface temperatures and rapid cooling cycles.
Maxibands are constructed as sets; each half consists of one tubular heating element and one aluminum track segment.
The low thermal expansion strap securely fastened to the aluminum track segments provides a built-in hinge, making handling and installation easier. Mounting brackets are welded to the strap, providing the clamping force required to draw the heater assembly evenly and tightly to the cylinder. The straps are equipped with clamping brackets with 1/4"-20 socket head cap screws.
The channels in the specially designed extruded aluminum track have been precisely sized to accept a .315 diameter tubular heating element, and provide an excellent heat sink for rapid heat transfer and good temperature uniformity.
Stainless steel tubing for liquid cooling is placed in the specially designed extruded aluminum track.
The channels in the specially designed extruded aluminum track have been precisely sized to accept a .315 diameter tubular heating element and provide an excellent heat sink for rapid heat transfer and good temperature uniformity. Stainless steel tubing for liquid cooling is placed in the additional channels of the aluminum track next to the tubular heater. The overall low mass construction and high thermal conductivity of the aluminum provides extremely uniform surface temperatures and rapid cooling cycles.
The clamping strap is made from a Low Thermal Expansion Alloy. It hinges at the terminal end to allow for easy installation. Specially designed mounting brackets with 1/4"-20 socket cap screws, located 180° from the terminal end, provide the clamping force required to tightly draw the heater assembly to the cylinder being heated.
EXPLORE MAXIBAND HEATERS SPECIFICATIONS
Cool Only
Heat and Cool
Heat Only
Straps with Clamping Brackets
Armor Cable
Lead Wire
Quick Disconnect Plugs
Terminal Housings
Terminals
Wire Braids
Seal Fittings
Right Angle Fittings
Threaded Fittings
Construction Options
Electrical Variations
Lead Variations
The channels in the specially designed extruded aluminum track have been precisely sized to accept a .315 diameter tubular heating element, and provide an excellent heat sink for rapid heat transfer and good temperature uniformity.
NOTE: See Additional Options for more Construction Options.
Stainless steel tubing for liquid cooling is placed in the specially designed extruded aluminum track.
NOTE: See Additional Options for more Construction Options.
The channels in the specially designed extruded aluminum track have been precisely sized to accept a .315 diameter tubular heating element and provide an excellent heat sink for rapid heat transfer and good temperature uniformity. Stainless steel tubing for liquid cooling is placed in the additional channels of the aluminum track next to the tubular heater. The overall low mass construction and high thermal conductivity of the aluminum provides extremely uniform surface temperatures and rapid cooling cycles.
NOTE: See Additional Options for more Construction Options.
The clamping strap is made from a Low Thermal Expansion Alloy. It hinges at the terminal end to allow for easy installation. Specially designed mounting brackets with 1/4"-20 socket cap screws, located 180° from the terminal end, provide the clamping force required to tightly draw the heater assembly to the cylinder being heated.
NOTE: See Additional Options for Clamping Variations.
Electrical Terminations are not required in a Cool Only Maxiband.
If you want to add an Electrical Termination please change your Construction Style selection to Heat and Cool or Heat Only.
